EV Charger Installation Cost in Irving, Texas
Typical cost for a Level 2 home charger installation: $450 – $1,000 in Irving, Texas
Verified local research
Local EV Charger Installation Factors in Irving
Checked 2026-05-09
Irving sits in Oncor territory, so the local wires company handles delivery and outages while the homeowner's retail electric provider controls the energy plan. The city's $65 electrical single-trade fee and separate multifamily-unit treatment are important for apartments, townhomes, and Las Colinas-style multifamily parking layouts where charger scope may not be a single detached-garage circuit.
Permit path
Permit required: Yes
Irving's residential permit guidance says building permits are required for work that erects, enlarges, alters, moves, demolishes, or repairs a structure, and it lists electrical work as a permit type that can be filed through the city's online portal without plans. Irving's 2026 code ordinance also applies the adopted electrical code to installations, alterations, repairs, replacement, equipment, appliances, fixtures, and appurtenances, which fits new EV charging circuits or service changes.
Published permit fee: $65 electrical single-trade permit; each multifamily unit is treated as a separate permit
City permit sourceUtility and incentives
Primary utility: Oncor
No active residential charger rebate was verified for this city.
Home and electrical context
Median home age: 40 years
Housing pattern: urban
Power cost and climate
Residential electricity rate source: $0.1556/kWh
IECC climate zone: 2A
Dallas County is in the 2021 IECC 2A hot-humid climate zone, so Irving charger locations should account for summer heat, humidity, and shaded equipment placement.
EV Charger Installation Cost Breakdown in Irving
Labor rate tier for Texas: Lower than average (lower cost-of-living state)
| Installation Type | Typical Range |
|---|---|
| Level 1 Charger (120V) | $150 – $450 |
| Level 2 Charger (240V) ✓ Most Popular | $450 – $1,000 |
| Level 2 + Panel Upgrade | $1,700 – $3,550 |
| Level 2, Outdoor Install | $550 – $1,350 |
* Estimates are for Irving, Texas. Prices vary by installer, home configuration, and permit fees. Get quotes from local pros for accurate pricing.
What Affects EV Charger Installation Cost in Irving?
Panel capacity & location
If your electrical panel is older or at capacity, you may need an upgrade ($1,500–$3,000). The further the panel is from your garage, the more wiring is needed.
Wiring distance
Runs under 25 ft are cheapest. Longer runs or runs through finished walls add $200–$1,200+ depending on complexity.
Indoor vs. outdoor installation
Outdoor installs require a weatherproof NEMA 3R enclosure and conduit, adding $150–$400 to the total.
Permits & inspections
Irving's residential permit guidance says building permits are required for work that erects, enlarges, alters, moves, demolishes, or repairs a structure, and it lists electrical work as a permit type that can be filed through the city's online portal without plans. Irving's 2026 code ordinance also applies the adopted electrical code to installations, alterations, repairs, replacement, equipment, appliances, fixtures, and appurtenances, which fits new EV charging circuits or service changes. Published city fee: $65 electrical single-trade permit; each multifamily unit is treated as a separate permit.
Ready to get quotes in Irving?
Compare local EV charger installers, read reviews, and get free quotes — all in one place.